In this post you learn how you can fix JBL Flip Wonot Turn On Issue. Flip 5 is definitely worth the asking price if you’re going on a weekend getaway or just starting your weekend in the backyard. When it comes to JBL’s Flip series, their toughness is what sets them apart. In a similar manner, the new JBL Flip 5 began as a splash proof device and soon became completely waterproof.
In spite of the fact that it is one of the best speakers available today, it still has a few shortcomings. It was reported recently that some users are having trouble turning on their JBL Flip. It is for this reason that our team has provided a guide to help you resolve this problem. In the event that your JBL Flip is not turning on, make sure to apply the following fixes.
How to Fix JBL Flip 4 Won’t Turn On Issue
- Reboot the Device
Your Flip may not be charging properly due to a random bug that prevents your speaker from working properly. Several users report that the problem has been resolved after rebooting their JBL Flips.
While power cycling is a better alternative to rebooting your speakers, it will break their working state and give them a fresh start. Try this and see if it helps.
2) Clean the Charging Port
JBL speakers fail when their internal components are continuously exposed to dirt or debris. If the charging port is dirty, the speaker won’t work properly.
If there is debris or dirt in the charging port, blow it out until it is clean. It is not recommended to remove dirt with a toothpick or another sharp instrument.
3) Battery Issues
The JBL clips are no different from other electronic devices when it comes to charging issues. If you try a different charging port or unit before concluding that the battery is beyond repair, it may still be salvageable.
A rectifiable adapter issue can cause the battery’s charge to decrease. If your battery is damaged, you can find an authorized dealer who can replace it. JBL Flip’s batteries can be replaced, so replacing them wouldn’t exert any strain on the device.
4) Configuration issues
The JBL Flip comes with a pre-configured setting. You may, however, be able to affect the battery’s life by changing your configuration settings. Software can have external bugs that could cause an issue within the configuration.
In order to resolve charging issues caused by configuration issues, you will need to restore the JBL’s default settings. Holding the multi-functional button for a few seconds will reset the device.
Once the LED has turned on, you can release the button. In addition, you can reset the Bluetooth pairing on the device so that it is safe to use and that it can be charged.
5) Factory Reset JBL Flip
A factory reset or hard reset is the first step in troubleshooting. The default settings of the Bluetooth speaker will be restored once the speaker’s data has been removed. If your JBL Flip is having trouble, follow these steps:
- Connect the speaker to the charger and then disconnect it. Charging will not be possible if it is disconnected.
- Make sure the speaker is connected to a power source. Turn it on by pressing the power button.
- In order to playback, hold volume + and press power at the same time. If the speaker is paused for three seconds, it should restart.
Problem 6: Faulty Charging Cable
Check the charger or cable first if your JBL Flip 4 battery doesn’t charge. If there is a hardware problem with your micro-USB charging cable, your JBL will not charge consistently.
In the event that the cable is confirmed to be defective, you can switch to another cable. Sometimes, a cable’s end or corners can be wobbly, resulting in battery and charging problems. Either scenario requires replacing the device to resolve the issue.
Since these cables are subject to generic wear and tear, replacing them or finding an issue shouldn’t be difficult.
The 7th Fix is for Charging Port Problems
Along with the speaker itself, your JBL Flip 4’s charging port also undergoes a lot of wear and tear. A device can become unchargeable if it accumulates too much dust, in addition to accumulating dirt from its surroundings.
When cleaning the charging port, use a safety pin gently and don’t apply too much pressure. Anyhow, if the port is flooded, you can dry it with a hairdryer.
8) Faulty Circuit Issue
JBL Flips are also prone to hardware or circuit damage. When the circuit is down, the battery will not be able to charge properly since it receives its primary power from it. Ensure that your JBL clip is not turning on for such a reason by reviewing the circuit.
The circuit of the JBL Flip speaker should be checked by a professional if it appears to be faulty.
9th Fix: Outdated Software
After all external components appear to be working correctly, it may be necessary to review the software. You should never rule out the possibility that outdated software is also the problem when you ask yourself, “Why doesn’t my JBL speaker work?”.
It is important to ensure that the device has the latest software without bugs and that it has been reset so that it can gain its charging lifespan.
10) Visit Service Center & Resolve JBL Flip Wonot Turn On Issue
The best thing to do if you cannot fix an issue yourself is to contact your nearest service center. JBL support should be contacted first if you have a complaint. Afterwards, take it to your nearest service center for repair. In some cases, you may be able to get a free repair if your device is under warranty.
The conclusion
When it comes to sound quality and price, the JBL Flip speakers are unbeatable. With its highly stylish exterior and the convenience of listening to music wherever you are, JBL hits all the right notes. When our JBL Flip won’t turn on, we all get nervous, which is why we break out in a cold sweat.
Now that you know what the problem is and how to solve it, you can fix it! In order to resolve the issue, one must understand the root cause and implement a solution. That’s how to fix the JBL Flip not turning on. Thank you for reading this guide. We hope you have found it helpful. If you’d like more information, leave a comment below.